Showing posts with label Process. Show all posts
Showing posts with label Process. Show all posts

Tuesday, October 2, 2007

Darn it


Enough with the corset. That leaves the stockings. These are made out of red cotton.

As these need to be seriously darned, here is how to go about darning a stocking from eHow.com:



Step One

Find thread or yarn that matches the sock in color and texture; you can use embroidery floss (a type of thread) to repair a crew sock, while wool yarn is appropriate for a wool sock. Choose a darning needle as well.

Step Two

Place a lightbulb in the sock and position the hole over the lightbulb. Your needle will glide smoothly over the bulb's surface, making your stitching go faster.

Step Three

Thread the darning needle with the yarn or thread and leave the end unknotted. The darning process should create a tight weave that makes knots unnecessary.

Step Four

Start your work on either side of the hole. Take several small vertical running stitches in the intact fabric of the sock, about 1/2 inch to the left or right of the hole. Turn the sock upside down and make another row of stitches next to the first.

Step Five

Increase the number of running stitches you make as you come closer to the hole. When you reach the point at which the hole begins, your stitching line should extend from 1/2 inch above the hole to 1/2 inch below it.

Step Six

Continue making vertical running stitches. When your stitching reaches the hole, take your thread or yarn over the hole and into the fabric on the other side, forming what resembles a vertical bridge over the hole. Stitching should extend 1/2 inch beyond the hole at both the top and bottom edges.

Step Seven

Cut the thread end once you have covered the hole with vertical threads and extended the stitching 1/2 inch past it so that both sides of the hole look identical.

Step Eight

Thread your darning needle and begin your work 1/2 inch from either side of the hole at either the top or bottom. Take the threaded needle and weave it under and over the vertical threads that cover the hole (as well as the vertical threads that lie within 1/2 inch of the hole).

Step Nine

Turn the sock upside down once you reach the opposite end of the hole, and weave another yarn strand next to the first. Continue stitching back and forth until you've completely filled the hole. Trim excess thread.


If you would like to bid on this print (really cheap), go to our eBay page.

Tuesday, August 14, 2007

What are these?

This is a question I am often asked about my art. Are they drawings, prints, photographs, illustration? And all I can really say is - Yes.

My process is simple. Digital photography. The shutter clicks, the strobes go off, and then the image is created. From there, the image is exported into PhotoShop and it is tweaked, remade. The colors are adapted to my pallet, as is saturation and contrast. Layers are created, color touched up, along with other changes and there you have it.

I have always been inspired by the art at the turn of the 20th century. This includes photographic process of that time as well as the designs found in Art Nouveau. Early entries on this blog provide examples.

Why digital? It has much to do with not creating more waste or environmental impact on this Earth. Digital is really good for that (though I wish technology would slow down a bit so computers would stop becoming obsolete so quickly).

Each image is about four and a half inches by seven inches in size. Each is printed on an eight by ten inch paper. This is an intimate project, needing intimate viewing. Do come closer.

And, they will last a long time if treated properly, as they are printed on archival paper with archival pigment inks.

The editions are all small. I do not believe in flooding the market place with images. for each photograph shown, there will be a limited edition of ten and each one comes with its own certificate of authenticity.